Filter
Top Products
RT-PRC007-EN40
Weights
Table W-1 — Approximate Operating Weights — Lbs.
2
Notes:
1. Basic unit weight includes minimum HP Supply Fan motor.
2. Optional high static and high efficiency motor weights are in addition to the standard
motor weight included in the basic unit weight.
DEF
TOP VIEW
OF UNIT
COMPRS
CBA
Table W-2 — Point Loading Average Weight
1
Note:
1. Point Loading is identified with corner A being the corner with the
compressors. As you move clockwise around the unit as viewed
from the top, mid-point B, corner C, corner D, mid-point E and
corner F.
Table W-3 — Component Weights
Weights of Optional Components
Hi-Static/
Variable Factory Roof
Hi-Eff 0-25% Inlet
Frequency Thru-the Non-Fused GFI with Curb
Unit Barometric Power Supply Fan Manual Guide
Drives (VFD's) Service Base Disconnect Disconnect Weights
Model Relief Exhaust Motors (2) Damper Econo Vanes W/O Bypass With Bypass Valves Electric Switch Switch Lo Hi
**D330 110 165 120 50 260 55 85 115 11 6 30 85 310 330
**H330 145 200 120 50 285 55 85 115 11 6 30 85 310 330
**D360 110 165 120 50 260 55 85 115 11 6 30 85 310 330
**H360 145 200 120 50 285 55 85 115 11 6 30 85 310 330
**D420 110 165 120 50 260 55 115 150 11 6 30 85 310 330
**H420 145 200 120 50 285 55 115 150 11 6 30 85 310 330
**D480 110 165 125 50 290 70 115 150 18 6 30 85 365
**H480 145 200 125 50 300 70 115 150 18 6 30 85 365
**D600 110 165 125 50 290 70 115 150 18 6 30 85 365
**H600 145 200 125 50 300 70 115 150 18 6 30 85 365
Table W-4 — Minimum Operating Clearances for Unit Installation
Condenser Coil
2
Service Side
Econo/Exhaust End End / Side Access
Single Unit
1
6 Feet 8 Feet / 4 Feet 4 Feet
Multiple Unit
1,3
12 Feet 16 Feet / 8 Feet 8 Feet
Notes:
1. Horizontal and Downflow Units, all sizes.
2. Condenser coil is located at the end and side of the unit.
3. Clearances on multiple unit installations are distances between units.
Basic Unit Weights
1
Unit YC YC TC TE
Model Low Heat High Heat
**D330 3650 4012 3520 3553
**H330 3650 4077 3565 3598
**D360 3730 4092 3600 3633
**H360 3730 4142 3600 3633
**D420 3815 4177 3685 3718
**H420 3815 4227 3685 3718
**D480 4765 4885 4540 4575
**H480 4790 4915 4540 4575
**D600 4935 5055 4710 4745
**H600 4960 5085 4710 4745
ABCDEF
1196 1159 673 710 673 710
1209 1171 680 718 680 718
1238 1199 696 735 696 735
1242 1203 699 737 699 737
1265 1226 712 751 712 751
1269 1230 714 754 714 754
1527 1480 859 907 859 907
1532 1485 862 910 862 910
1598 1549 899 949 899 949
1602 1553 902 951 902 951