Filter
Top Products
Wireless remote controller kit
Installation Manual
–4–
EN
3 INSTALLATION LOCATION OF SIGNAL
RECEIVING UNIT
• Do not install in a location where the air contains oil mist, such as in a kitchen or factory.
• Do not install next to a window, or in any other location directly exposed to sunlight and
outside air.
• Do not install nearby devices which can be expected to produce electrical noise, such as
elevators, automatic doors, and industrial sewing machines.
• If the Signal receiving unit is installed near a rapid-start type or inverter-type fluorescent
lamp (a lamp which does not include a glow lamp), it may not be possible to receive the
wireless remote controller signal in some cases. In order to prevent interference from
fluorescent lamps, leave a minimum of 6’7” (2 m) between the Signal receiving unit and
the fluorescent lamps, and install the Signal receiving unit in a location where it can receive
the wireless remote controller signal when the fluorescent lamps are lit.
4-EN
+00EH99677601_01EN_remo_IM.book Page 4 Thursday, October 8, 2009 4:12 PM