Filter
Top Products
– 120 –
No.
3
Part name
Side cabinet
Procedure
1. Detachment
1) Carry out the operation in 1. of
Q
above.
2) Remove the screws fixing the inverter assembly
and the side cabinet. (ST1T Ø4 × 10, 3 pcs.)
3) Remove the screws for the side cabinet and the
valve fixing plate. (ST1T Ø4 × 10, 2 pcs.)
4) Remove screw for the side cabinet and piping
panel (rear). (Hexagonal screw Ø4 × 10, 2 pcs.)
5) Remove screw for the side cabinet and the
bottom plate. (Hexagonal screw Ø4 × 10, 1 pc.)
6) Remove screws for the side cabinet, heat
exchanger and the fin guard.
(Hexagonal screw Ø4 × 10, 5 pcs.)
2. Attachment
1) Temporarily suspend the side cabinet on the
inverter assembly using the hook.
2) Mount the removed screws in the opposite
procedure to that during detachment.
Remarks
Valve
f
ixin
g
plat
e
Valve fixing plate
Discharge port cabinet
Inverter ass’y
Inv
e
rt
e
r
ass
’
y
Side cabinet
H
ook