Filter
Top Products
– 197 –
Valve fixing plate
Discharge port cabinetMotor base
Heat exchanger
Inverter assembly Side cabinet
Fin guard
Partition board
No.
2
3
Part name
Discharge
port cabinet
Side cabinet
Procedure
1. Detachment
1) Carry out work of 1 of
1
.
2) Remove screws for the discharge port
cabinet and the partition board.
(ST1T Ø4 × 8, 4 pcs.)
3) Remove screws for the discharge port
cabinet and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
4) Remove screws for the discharge cabinet
and the motor base.
(ST1T Ø4 × 8, 2 pcs.)
5) Remove screw for the discharge cabinet
and the heat exchanger.
(ST1T Ø4 × 8, 1 pc.)
6) Remove screws for the discharge port
cabinet and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
1) Carry out work of 1 of
1
.
2) Remove the screws which fix the inverter
assembly and the side cabinet.
(ST1T Ø4 × 8, 2 pcs.)
3) Remove the screws for the side cabinet
and the valve fixing plate.
(ST1T Ø4 × 8, 2 pcs.)
4) Remove screws for the side cabinet and
the piping panel (Rear).
(Hexagonal screw Ø4 × 10, 2 pcs.)
5) Remove screw for the side cabinet and the
bottom plate.
(Hexagonal screw Ø4 × 10, 1 pc.)
6) Remove screws for the side cabinet and
the fin guard (Heat exchanger).
(Hexagonal screw Ø4 × 10, 5 pcs.)
Remarks