![](http://pdfasset.owneriq.net/8/e7/8e738efa-4a98-4f5d-8a42-37fa3027d613/8e738efa-4a98-4f5d-8a42-37fa3027d613-bga1.png)
– 161 –
2. How to confirm the central control address
(New function for AMT32 remote controller)
<Procedure> It can be confirmed even during operation or stopping.
1 Push
UNIT LOUVER
button for 4 seconds or more.
ò
2
In the frame at left side of the remote controller screen, the lighting set contents are
displayed.
During unset time, '' (At shipment from factory) is displayed.
ò
3
After lighting display for 3 seconds, the display automatically disappears.
If any button is pushed during display, immediately the display disappears and then the pushed button is
displayed.