Filter
Top Products
– 106 –
No.
Part name
Compressor
Procedure
1) Perform work of item 1 of
and
,
,
,
.
2) Extract refrigerant gas.
3) Remove the partition board.
(screw 3 pcs.)
4) Remove the sound-insulation material.
5) Remove terminal cover of the compressor,
and disconnect lead wire of the compressor
from the terminal.
6) Remove pipe connected to the compressor
with a burner.
• Take care to keep the 4-way valve away
from naked flames. (Otherwise, it may
malfunction.)
7) Remove the fixing screw of the bottom plate
and heat exchanger.
8) Remove the fixing screw of the bottom plate
and valve fixing plate.
Remarks
Reactor 1) Perform work of item 1 of
, and
.
2) Remove screws fixing the reactors.
(screw 2 pcs.) for 09LAV
FILE NO. SVM-10019
9) Pull upward the refrigeration cycle.
10) Rem
ove NUT (3 pcs.) fixing the compres-
sor to the bottom plate.
(screw 4 pcs.) for 12LAV