Filter
Top Products
ESV4 User’s Manual 89
Once you have multiple preset points defined for a camera, it is con-
venient for monitoring to set up the sequencing viewing among those
preset point and let the recorder automatically switch between them
for you.
To configure preset sequence for a camera,
1. Select a channel from the “Channel” drop-down menu. The available
preset points should be listed in “Camera Presets” section.
2. Pick the ones you like for sequence viewing and press the “->”
button to move them to the “Preset Sequence” section, then
3. Use the up and down buttons to adjust their sequencing positions.
4. Finally, select a dwell time from the drop-down menu and click
“Apply” to save the configuration