Filter
Top Products
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
RTC BATTERY REMOVAL
1. Disconnect the power cable from PJ801 on the top PCB.
2. Remove two M2.5x4 brass screws and one M2.5x16
black screw securing the top PCB.
3. Gently lift up the right side of the top board to disconnect
from PJ19 on the top PCB.
TOP PCB REMOVAL
4. Remove the PC card slot from PJ117 on the top PCB.
5. Disconnect the following cables from the top PCB:
-Sound interface cable from PJ102
-SD interface cable from PJ103
-Modem cable from PJ126
LED/BLUETOOTH BOARD REMOVAL
RTC
battery
Plastic insulator
RTC cable
PJ5
1. Remove the plastic insulator.
2. Disconnect the RTC cable from PJ5 on the
LED/Bluetooth board.
3. Lift out the RTC battery.
1. Remove two M2.5x4 brass screws and one M2.5x8
silver screw securing the LED/Bluetooth board.
2. Disconnect the LED/Bluetooth board from PJ105
on the top PCB.
M2.5x8
silver
screw
M2.5x4 brass screwsLED/Bluetooth board
M2.5x4 brass screws
Power
cable
M2.5x16 black screw
PJ801
This is where
top and bottom
board interconects
SD interface cable
Sound interface
cable
PC card slot
Modem cable
Download service manual and resetter printer at http://printer1.blogspot.com