Filter
Top Products
WIRELESS LAN CARD REMOVAL
1. Remove one M2x4 security torx screw securing
the mini PCIcover and lift out the cover.
Mini PCI cover
M2.5x4 security torx screw
2. Disconnect the black and white coax from the
wireless LAN card.
3. Spread the Mini-PCI connector clips and pull the
Wireless LAN card out of the connector about
45 degree angle.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
Black coax cable
White coax cable
Wireless LAN card
Mini-PCI
connector
clips
TOP COVER REMOVAL
1. Turn the computer upside down and remove the
following screws:
-2 M2.5x2.8 silver flat head screws
-1 M2.5x4 black flat head screw
-4 M2.5x8 silver screws
-4 M2x12 silver screws
-6 M2.5x16 silver screws
2. Turn the computer right side up and open the display.
M2x12
silver
screws
M2.5x8 silver screws
M2.5x16 silver screws
M2.5x4
black flat
head
screw
M2.5x2.8
silver flat
head screws
3. Disconnect the speaker cable from PJ127 and the
membrane switch cable from PJ122 on the top board
4. Remove the glass tape securing the LCD/FL cable
and disconnect the cable from the bottom board.
5. Remove two M2.5x8 silver screws and one M2.5x14
black screw from the keyboard area.
5. Lift out the top cover assembly.
Membrane switch cable
LCD/FL cable
Glass tape
PJ127
Speaker
cable
Note: When installing the top cover, ensure that the bluetooth
coaxial cable is properly routed to the Bluetooth slot.
M2.5x8 silver screws
PJ122
M2.5x14 black screw
Download service manual and resetter printer at http://printer1.blogspot.com