Filter
Top Products
4. Remove two M2.5x2.8 silver screws securing the
keyboard.
M2.5x2.8 silver screws
Latch
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
9000 Series
KEYBOARD REMOVAL
KEYBOARD REMOVAL
2. Turn the computer right side up and open the display
panel.
3. Using the case separator, unlatch the keyboard holder
at the top of the keyboard.
Keyboard holder
Keyboard
5. Lift out the keyboard and set it as shown above(Place
an insulator between the keyboard and the LCD to
prevent scratches on the LCD).
6. Disconnect the keyboard cable from PJ123 on the
system board.
Keyboard
Keyboard
cable
PJ123
MODEM BOARD REMOVAL
1. Remove two M2x4 brass screws securing the
modem board.
2. Disconnect the modem board from PJ125 on the
system board.
M2x4 brass screws
Modem
board
TOSHIBA
Tough Enough for Today’s World.
Download service manual and resetter printer at http://printer1.blogspot.com