Toro 212 Smoke Alarm User Manual


 
Turn the control dial to the STATION TIMES
position.
Check the
PROGRAMS switch setting. If necessary,
reposition the switch to select the desired program.
Station number 1 will be flashing and its current run
time or OFF will be shown. To select a different sta-
tion number, press the
+/ON or /OFF button until the
desired station number is flashing.
Press the
NEXT button. The run time (or OFF) will
begin flashing.
To set the run time, press the
+/ON or /OFF button
until the desired run time is shown.
Note: To remove the run time, select OFF by press-
ing the
+/ON and /OFF buttons at the same time.
Press the NEXT button. The next station number will
begin flashing.
7. Repeat steps and as needed to set, change,
or remove the run time for the remaining stations
.
8. To set the station run time for another program,
repeat all of the steps starting at step .
Return the control dial to the
RUN position.
Setting Station Run Times
21
PGM A
123456
3 5
3 5
9
4
3
5
2
1
4
2
5