Toro 212 Smoke Alarm User Manual


 
For each program, you can select Calendar, Interval
Odd, Even or Off. To set a Calendar schedule, continue
here. To set an Interval schedule see page 18. To set an
Odd or Even schedule see page 19. To turn Off a pro-
gram, see page 19.
Setting A Calendar Schedule
Turn the control dial to the WATERING DAYS
position.
Check the
PROGRAMS switch setting. If necessary,
reposition the switch to select the desired program.
The current watering schedule will be displayed. If
CAL (Calendar) is not displayed, press the +/ON or
/OFF button as needed to select CAL.
Press the NEXT button. The watering days currently
set for this program will be displayed.
SU (Sunday)
will begin flashing.
To select Sunday as a watering day, press the
+/ON
button. To remove Sunday from the schedule, press
the
/OFF button. MO (Monday) will now begin flash-
ing. Continue to select or remove each day of the
week until only the desired watering days are shown.
6. To set a Calendar schedule for another program,
repeat all of the steps beginning at step .
When you have completed setting the Calendar
schedule for each program (as needed) return the
control dial to the
RUN position.
Note: Each program can have its own Calendar, Inter-
val or Odd/Even schedule, but only one schedule can
be active at a time for that program. The watering day
schedule or OFF shown in the display when the control
dial is in the
WATERING DAYS
position, will be the
current schedule for that program.
Setting The Watering Day Schedule
17
3
1
PGM A
3
2
7
5
4
5
5
4
2
SU MO TU WE TH FR SA
3