Filter
Top Products
3.2. Switching on the dryer
Switch on the system by means of the main switch.
&
The control system carries through a self-test; after that, the name of the
dryer and the operation status of the unit are displayed.
F
Unblock the control system:
Keep the ACK key pressed until the LEDs of the keys K1 - K4 light up.
3.2.1. Operation statuses
The following operation statuses can be displayed:
•
system is off
•
system is on
•
blower runs on
•
valve block
•
regeneration will be finished in x min.
526-2MS
STT 800
Start-up 3-4