SkyLink HU-318 Indoor Furnishings User Manual


  Open as PDF
of 34
 
9
PROGRAMMING THE INTERNET HUB
ASSIGN ZONES AND LIGHTS
ASSIGN ZONES AND LIGHTS PROGRAMMING THE INTERNET HUB
7. After you have assigned a name for each light or device, you may now learn
the light to the Wireless Module. Refer to the User’s Instructions of that
specicreceivertoputtheunitinto‘Learning’mode,thenpressthe[Learn]
buttonontheInternetHubinterface.TheSignalLEDwillash,then
turnoffontheInternetHubindicatingthe‘Learn’codehasbeensent.
8. This light is now programmed to the Wireless Module.
Repeat the same instructions to program the rest of the lights.
9.Tooperatethelights,gotothe‘ZoneControlPage’.
Forexample,select[Kitchen]andchoosethelightyouwanttocontrol.
 previous next