Filter
Top Products
80
CAUTION
Always be sure to turn off power to machine before
installing embroidery unit.
REMOVING EMBROIDERY UNIT
* Turn off power to machine.
* Remove embroidery hoop from machine.
(Refer to page 72 - 73.)
1. Holding handle of embroidery unit, carefully slide toward the
left while pressing release lever.
Note:
Do not pull carriage when removing embroidery unit.
2. Insert the tab at the bottom of connector cap first, and push in
the top of the connector cap with your finger as illustrated.
2
1
Release lever
Support de cerceau
Palanca de liberación
Connector cap
Couvercle de connecteur
Tapa de conector
Handle
Poignée
Mango
Tab
Languette
Lengüeta