Filter
Top Products
DARNING PLATE
CHANGING THE BULB
1-(1)
1-(2)
LED Φ5MM DC3V 0.6W
+
-
4
-
+
MAINTENANCE
TROUBLESHOOTING
26
25
Disconnect the machine from the power supply be removing the plug from the main socket.
Replace the bulb with the same type rated
2
-
+
-
+
3
How to solve common problems
1.Wipe the machine with clean cloth.
2.Remove bobbin cover and take out the bobbin, place the bobbin cover back after cleaning
with a small brush.
3.Keep the machine away from high temperatures.
4.Do not drop.
5.Please turn to the instruction manual when changing the accessories, and make sure
these are installed correctly.
Solution
Rethread the upper thread
and bobbin