24
25
Problem Solving Guide
Unclogging nozzle and hose
CAUTION: Disconnect the vacuum cleaner
from the electrical outlet before cleaning
nozzle housing.
The nozzle hose, located on the back of the
vacuum, carries the dirt from the nozzle to
the vacuum bag. The hose also functions
as the attachment cleaning hose. First
check to see that a bag is installed or that
the bag has not broken open.
If the hose should become clogged
• Pull out and turn the lid of the cleaning
attachment opening. Remove the clog or
blockage.
• Remove the hose cuff from the nozzle
inlet and check for clog.
• Turn unit over and remove bottom plate
(See “Removing and reinstalling bottom
plate”). Check the nozzle inlet tube for
obstructions. Clear tube and reinstall the
bottom plate.
Replacing the headlight bulb
CAUTION: Disconnect the vacuum
cleaner from the electrical outlet before
replacing bulb.
• Remove bottom plate (See “Removing
and reinstalling bottom plate”).
• Remove the headlight bracket by pulling
upward on bracket. To remove the light
bulb, pull it straight out of the socket. To
install new bulb, simply push it straight
into the socket for a secure fit. Reinsert
bracket back into nozzle.
• Reinstall bottom plate (See “Removing
and reinstalling bottom plate”).
Edge cleaning
The edge cleaning feature provides for
improved cleaning of carpets near walls
and stationary furniture. For maximum edge
cleaning, place the right side of the nozzle
against the wall or furniture.
Annual checkup reminder
To keep your vacuum in peak operating
condition, it is recommended you bring
your vacuum to your Authorized Simplicity
Retailer for an annual checkup. Your
Retailer will conduct a comprehensive
examination to ensure your vacuum is in top
operating condition.
Maintenance and Care
Inlet Tube