Filter
Top Products
2
TOLL FREE: 1-800-798-7398
3
www.sharkclean.com
English
Getting Started
FIRST THINGS FIRST, YOU NEED TO
KNOW WHAT’S IN THE BOX YOU
JUST OPENED:
a Upper Extension Tube
b Lower Extension Tube (Telescopic)
c Steam Mop Base
d Micro-Fiber Pads
e Filling Flask
f Funnel
g Carpet Glider*
NOTE: The Carpet Glider* (g) is
an optional attachment and is sold
separately.
YOUR SHARK STEAM MOP IS
EASY TO ASSEMBLE
1 First remove all the parts from the
package. We know you’re excited
about the Shark Steam Mop,
but don’t plug it in until it’s fully
assembled and you’ve read all of the
following instructions.
2 Slide the upper extension tube (the
tube with the handle) into the lower
extension tube (the short tube). Push
the two extension tubes together in
until you hear it click into place. See
illustration for a visual explanation.
IMPORTANT: Always make sure that
your Steam Mop is unplugged from
the wall before you attach the
micro-fiber cleaning pad.
Each micro-fiber cleaning pad
has a white or blue colored
tab so that you can use a
different pad for different
tasks. Use one color for tough
grime on tile floors, another
color for stubborn spots on
linoleum and another color
for pet stains. Keep your
floors happy! Always attach
the micro-fiber cleaning pad
to the mop head or you may
scratch your floor surface.
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark
®
Steam Mop.
3 Insert the pieces you assembled in
Step 2 into the pump actuator (the
tube that leads to the tank). Push the
extension tube assembly and pump
actuator together in until you hear it
click into place. Insert cord into cord
clip on the shaft of the steam-mop.
2
3
a
b
c
d
e
f
g*
S3101_SERIES-S3202_SERIES_11_ENG_IB_100909.indd 2-3 08/09/10 4:33 PM