Filter
Top Products
16
Adjusting settings via the operating menu
Entering a name – “Name”
Via the “Name” menu, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver. The name is displayed on the
standard display (see page6). The name can consist of up to 8 characters
such as:
• letters (without pronounciation marks),
•numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Adjusting the audio output level – “AF Out”
Adjustment range: –30 dB to +12 dB, adjustable in 6-dB steps
Via the “AF Out” menu item, you can adjust the level of the audio output
Line from the receiver to the input of the connected camera.
Activating/deactivating the automatic lock mode – “Auto Lock”
The lock mode prevents that the diversity receiver is accidentally switched
off or programed during operation. The lock mode icon ቦ on the
current standard display indicates that the lock mode is activated. For
information on how to use the lock mode, refer to page 10.
The extended menu “Advanced Menu”
To get into the extended menu “Advanced Menu”:
̈ From the main menu, select “Advanced”.
Setting the receiving frequencies for the frequency bank “U” –
“Tune”
̈
Press the rocker button to select a character.
̈ Press the SET button to change to the next segment/character
or to store the complete entry.
When you have selected one of the system banks and then select
the “Tune” menu, the diversity receiver automatically switches to
channel 1 of the frequency bank “U”. In this case, “U.1” briefly
appears on the display panel.
Upon delivery, the channels of the frequency bank “U” are not
assigned a receiving frequency.
Menu
Lichael
Name
Name
Name
Lichael
Michael
“Stored”
Call up “Name” Enter a character
and confirm
Enter a character;
store the setting
SET
Call up “
AF Out
”
Select the desired
setting
0 dB
AF Out
0 dB 0 dB
AF Out
Menu
Store the setting
“Stored”
SET
SET
AF Out
+ 6 dB
Active
Auto Lock
Active
Auto Lock
Inactive
Auto Lock
Menu
“Stored”
SET
SET
Call up
“Auto Lock”
Select the desired
setting
Store the setting