Filter
Top Products
10
Using the diversity receiver
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto
Lock” menu item (see page 16). If the lock mode is activated, you have to
temporarily deactivate it in order to be able to operate the receiver:
The lock mode icon ቦ flashes prior to the lock mode being activated again.
Selecting a standard display
For more detailed information, refer to the chapter “Overview of the
displays” on page 6.
̈ Press the SET button.
“Locked” appears on the display panel.
̈ Press the rocker button.
“Unlock?” appears on the display panel.
̈ Press the SET button.
– When you are in the operating menu, the lock mode remains
deactivated until you exit the operating menu.
– When one of the standard displays is shown, the lock mode
is automatically activated after 10 seconds.
̈ Press the ON/OFF button to select a standard display.
Contents of the display Selectable standard display
“Frequency/Name”
with “MUTE” display ቨ
“Frequency bank/Channel/Name”
with display of the line output level
“AF OUT” ቨ
SET
SET
MHz
823.925
ew100 G3
P
AFRF
MUTE
ON/OFF
MHz
823.925
ew100 G3
P
MUTE
AFRF
B.Ch: 1. 1
ew100 G3
P 0
AFRF