Filter
Top Products
496336 Issue 1 9 of 22
4. Press 0.
The display shows: 0:INST PROG
5. Press Enter.
The display prompts you to remove the end station lid: REMOVE LID
6. If the end station Tamper Switch is already open, close and open it
again.
You have now reached the Installer programming
mode. The display shows: 00-PROG SYSTEM
Finding Menu Items
The 808 programming is divided into sets of numbered menus. Each menu
starts with a two digit number. The menus are grouped together into the
following categories:
Menu No Category
00 Start point for Installer programming.
01, 04, 09 Software version, Testing, and Printing.
10, 11 Account Name.
20, 21 Zone circuit type.
31 - 32 Zone and Area Programming.
40 - 47 Level and keypad Programming.
50 - 53 Output Programming.
60 - 67 System Options.
For a complete list of Menus and options see the next two pages.
808 Finding Menu Items