Filter
Top Products
496336 Issue 1 5 of 22
Enabling/Disabling Keys, Display and Sounder
5. Press ‘Enter’.
LED 2 lights and the display shows the status of the keypad sounder: 0
for sounder ‘ON’ or 1 for sounder ‘OFF’, for example: 2- 0
6. Change the keypad sounder status as required by entering 0 or 1.
(The keypad sounder is normally left at ON = ‘ZERO”).
7. Press ‘Enter’.
LED 3 lights and the display shows the current status of the keypad
back-light: 0 for timed or 1 for back-light always ‘ON’, for example: 3- 1
8. Change the back light status as required by entering 0 or 1.
9. Press ‘Enter’.
LED 4 lights and the display shows current keypad keys status: 0 for
Active or 1 for Inactive, for example: 4- 0
10. Change the keypad status as required by entering 0 or 1. (The keypad
keys are normally left active = ‘ZERO’.)
11. Repeat 1 to 10 for any other keypads connected.
12. Set the ‘Prog’ switch to OFF and remove power to the keypads to lock
the address and options into the keypad(s).
808 Enabling/Disabling Keys, Display and Sounder