Filter
Top Products
14
TROUBLE-SHOOTING GUIDE
PROBLEM
Does not turn on
Bag full or clog light on
Bag full or clog light on
& machine shuts off
Does not pick up
Filter bag door won’t
fully close
REASON
1. Telescopic tube not inserted properly.
2. Not plugged into working outlet.
3. Cable worn.
4. The power control button
switch is set to “-” (“off” position).
1. Bag full.
2. Clog in hose, telescopic tube,
brush or head, or entrance to
filter bag.
3. Hospital-grade micro filter dirty.
4. Motor filter dirty.
1. Hose/handle assembly not
correctly inserted.
2. The power control button
switch is set to “-” (“off” position).
3. Filter bag cover not closed.
1. Filter bag cover not fully closed.
2. Bag not inserted properly.
3. Motor filter not properly
inserted.
SOLUTION
1. See page 7.
2. Use another outlet.
3. Replace cable.
4. Set power control button to “+”
position. See page 9.
1. Replace filter bag. See page 11.
2. See Clog Removal on page 13.
Users with clog in power head
attachment: refer to clog removal
in the ET-1, ET-2 or DISCO owner’s
manual.
3. Replace hospital-grade micro filter.
See page 12.
4. Replace motor filter. See page 12.
1. Re-insert hose/handle assembly
making sure that it is lined up
properly and is snapped into
place. See page 7.
2. Set power control button to “+”
position. See page 9.
3. See below.
1. Re-insert bag. Lock the cover
down firmly. See page 11.
2. Re-insert bag. Lock the cover
down firmly. See page 11.
3. Remove the filter bag cover (18) and
make sure the motor filter is seat-
ed firmly in place all the way around
the rim. See page 12.
Always unplug vacuum from outlet before dismantling any part of the machine!
!