Sears P/N93SR-D02 Air Conditioner User Manual


 
AVOID SERVICE CHECKLIST (continued) 1
OCCURRENCE POSSIBLECAUSE SOLUTION
Air conditioner heaiing but
room too cool (some models
only).
Dirty air filter-air restricted.
Thermostat set too cool
(hlgher number)_
clean air filter.
Turn thermostat
counterclockwise to warmer
setting (lower number).
Exhaust vent control set at
OPEN/EXHAUST position;
Set control to CLOSED position
for maximum heating
Air directional louvers
positioned improperly_
Position louvers for' better air
distribution_
Front of unit is blocked by
drapes, blinds, furniture, etc.-
restricts air distribution.
Clear blockage in front of unit.
Doors, windows, registers,
etco open-hot air escapes;
cold air enters.
Close doors, windows,
registers, etc,.
Unit recently turned on in
cool room.
Allow additional time to heat
walls, ceiling, floor and furniture.
Insufficient heating capacity
for area to be heated.
Reconfirm the required heating
capacity with your dealer°
10