Sears 758.14808 Humidifier User Manual


 
Step 1
Reference the unlocking instructionson
the uppercarton flaps of the shippingcar-
ton your Kenmore humidifierwas received
in. The casters and hardware are inside
the humidifiercabinet.
, k :........... : _'i/¸!':I'•'/:•: ¸: : : •_ "•: '::i •i¸•I .
NOTE: Only two of the four holes in the
caster plate will align for proper caster
Installation.
Step2
Carefully place your humidifier upsiCe
down on a soft surface such as a rug or
carpet. Locatethe screwyholes on the bot-
tom comersof the cabinet.
Step 3
Each caster should be attached with two
(2) screws placed diagonally from each
other. Turnthe unit uprightand you willbe
ready to position your humidifier in the
locationofyour choice.
Location Instructions
I Illl II I IIIIII IIIlUl IIIIII II
j ..... WARNING j
For your own safety, do not use
humidifier if any parts are damaged
?r missing, i
Step I
Place humidifierin area of house where
most humidity is needed, or one which
would likelyresultin moist air being circu-
latedthroughoutthe house suchas near a
cold air return. Moist air (humidity) pro-
duced willdispeme into the whole house,
but area closestto unit will have the high-
est humidity.
Step 2
The humidifiermay be positionedwith the
back (cord exit side), or left side (side
opposite hinged lid) flush to the wall, or
away from the wall. Air needs to enter
throughlouversin the hingedaccess lid in
order for humidifierto operate at peak effi-
ciency.
NOTE: Due to release of cool, moist air
from humidifier, it is best to direct air
away from home thermostat, it Is best
to position humidifier next to an inside
wall. Hot air registers and cold air from
outside walls can affect the efficiencies
of the controls. Unit should not be
placed where warm air from a hot air
register blows directly on unit.
Electrical Hook-Up
Step I
Locate nearest 120V A.C. wall socket in
the location desired, preferably on inside
wall.. Plug in the electrical cord.
HIIIIIIIIIIIIIIII III III I I III II I
.......................WARNING ...........
To avoid fire or shock hazard, humidi-
fier, should be plugged into a 120V
A.C. outlet. Do not use extension
cords.
Water Fill
! WARNING ......................1
ITo avoid shock, always unplugJ
lhumidifier before filling, cleaning, or !
Jservicing. ...............
HINGED
LID
I I _ IL
Step 1
Raise the hinged access lid and note the
locationofthe controlstowardsthe rear of
the humidifier(Figure3).
CONTROL
AREA
FULL
INDICATOR
L.ASEL
4 Figure 3 HOLE