Sears 1340 Sewing Machine User Manual


 
,*- ACCESSORIES ill
1
1
NEEDLES
Use KENMORE needles. The size of the
needle should conform with the size of the
thread and both should be suitable to the
fabric. Kenmore needles are color-coded by
size for your convenience (See chart on
next page).
Never use a bent needle or one with a dull
point.
If you do not have a Kenmore needle, please
use this illustration to be sure your needle is
the right size. Distance from top of needle to
needlehole should be this exact length.
You will find among your accessories a
'O._EEDLE",. with blue shank. This special
needle is to be used when sewing knits and
certain difficult synthetic fabrics. If you
experience skipped stitches in any of your
sewing, use "o NEEDLE",=and "O FOOT",.
Flat
side
away
from
you
!
PLACEMENT OF NEEDLE
Raise needle bar to its highest position by
turning the hand wheel toward you. Loosen
the needle clamp screw. Holding the needle
with the flat side away from you, slip the
needle into the needle bar. When it is in as far
as it will go, tighten the needle clamp screw
with small screwdriver provided in the
accessory box.
16