Sanyo vcc-zm300p Home Security System User Manual


 
DISPLAYING/CLOSING THE MENU SCREEN
1
Press the SET button for about 3 seconds.
The
MAIN MENU
screen will appear.
2
Using the cursor button
1 Use the cursor button (l) to move the cursor down.
When the cursor reaches the bottom of the screen, it goes
back up to the top of the screen.
2 Use the cursor button (j) to move the cursor up. When
the cursor reaches the top of the screen, it goes back
down to the bottom of the screen.
3 Use the cursor button (c) to move the cursor to the right.
This button is also used to change ON/OFF settings etc.
4 Use the cursor button (d) to move the cursor to the left.
This button is also used to change ON/OFF settings etc.
3
Switching to sub-menu screens
Use the cursor button (j l d c) until an item with a “y
next to it is flashing, then press the
SET
button.
4
Closing a settings screen
To return to the previous screen, use the cursor button (l)
to select BACK for MENU, then press the
SET
button.
To return to the normal screen, use the cursor button (d or
c) to select END for MENU, then press the
SET
button.
Returning to the default setting
Use cursor button (l, then d or c) to change the
PRESET
setting to
ON
, then press the
SET
button.
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
LANGUAGE
LANGUAGE ENGLISH
LANGUE FRENCH
SPRACHE GERMANY
MENU BACK
MAIN MENU screen
Sub-menu screen
SET
Cursor button SET button
L5AA2/XE GB 2002, 4, 25
English
8