Filter
Top Products
OPTION SETTING
ADDRESS setting
1
Use the cursor button (
j
or
l
) to move the cursor to
OPTION, then press the SET button.
The OPTION screen will appear.
Note:
The PRESET ON setting cannot be used when OPTION
settings are in use.
2
Use the cursor button (
j
or
l
) to move the cursor to
ADDRESS, and then use the cursor button (
d
or
c
) to
select the address.
Available settings:
0 (d) ~ 127 (c)
☞
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
ALARM setting
A
Alarm input setting (ALARM IN)
Make the following settings for alarm detection.
Connect the external alarm switch to the alarm input terminal on
the back of the camera.
1
Use the cursor button (
j
or
l
) to move the cursor to
OPTION, then press the SET button.
The OPTION screen will appear.
Note:
The PRESET ON setting cannot be used when OPTION
settings are in use.
2
Use the cursor button (
j
or
l
) to move the cursor to
ALARM, then press the SET button.
The ALARM SETTING screen will appear.
3
Use the cursor button (
d
or
c
) to select POLARITY
between “NO” and “NC”.
Available settings:
•
NO:
Normal open (Normally open so closed condition is
detected as input.)
•
NC:
Normal closed (Normally closed so open condition is
detected as input.)
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
OPTION
CONTROL 485 ‚
ADDRESS 0
ALARM SET ‚
12
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
OPTION
CONTROL 485 ‚
ADDRESS 0
ALARM SET ‚
L5AA2/XE GB 2002, 4, 25
English
47