Filter
Top Products
CONNECTIONS
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.) and cables
are sold separately.
1
Make the video signal connection between the camera
and the monitor or time lapse VCR.
When using this unit, the supplied clamping core A must be
installed on the power cord and BNC cable, in order to
prevent electromagnetic interference to the other devices
connected.
2
Power supply choices
• Use a commercially available 24 V AC adaptor. Make sure
to use a cable with an earth line (22AWG or more) to
connect to the grouding terminal. (
Fig.1.
)
• When using a DC 12 V power supply, make the
connections as indicated in
Fig. 2
.
CAUTION:
To prevent camera and/or power supply failure, pay close
attention to polarity when making the connections.
3
Insert the plug of this power supply into a wall outlet.
The
POWER
indicator
(A)
will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.
GND
AC24V
DC12V CLASS 2WIR
GND
AC24V
DC12V CLASS 2WIR
(Video signal connections)
: VIDEO IN
: VIDEO OUT
(A)
AC 24 V connection DC 12 V connection
Fig. 1 Fig. 2
Time lapse VCR or
Digital video recorder
(sold separately)
TV monitor
(sold separately)
A
L5AA2/XE GB 2002, 4, 25
English
6