Sanyo SAP-CMRV1426EH-F Air Conditioner User Manual


 
20
English
WARNING
Be sure to comply with local codes on running
the wire from the indoor unit to the outdoor unit
(size of wire and wiring method, etc.).
Each wire must be firmly connected.
No wire should be allowed to touch refrigerant
tubing, the compressor, or any moving part.
Be sure to connect power wires correctly
matching up numbers on terminals of the
outdoor unit and respective indoor units A – D.
CAUTION
Be sure to connect the power supply line to the
outdoor unit as shown in the wiring diagram.
The indoor unit draws its power from the
outdoor unit.
Do not run wiring for antenna, signal, or power
lines of television, radio, stereo, telephone,
security system, or intercom any closer than
1 meter from the power cable and wires between
the indoor and outdoor units. Electrical noise
may affect the operation.
To avoid the risk of electric shock, each air
conditioner unit must be grounded.
For the installation of a grounding device,
please observe local electrical codes.
Grounding is necessary, especially for units
using inverter circuits, in order to release
charged electricity and electrical noise
caused by high tension.
Otherwise, electrical shock may occur.
Place a dedicated ground more than 2 meters
away from other grounds and do not have it
shared with other electric appliances.
WARNING
Fig. 25b
4 indoor units with SAP-CMRV2446, CMRV3146
INDOOR UNIT
4
3
2
1
3
2
1
2
1
UNIT A
Ter m inal
L
N
A
B
C
Ter m inal
(
9P
)
Ter m inal
(
2P
)
OUTDOOR UNIT
Grounding line
INDOOR UNIT
4
3
2
1
6
5
4
UNIT B
Ter m inal
Grounding line
INDOOR UNIT
4
3
2
1
9
8
7
UNIT C
Ter m inal
Grounding line
Grounding line
Power supply
Single-phase 220-240VAC 50Hz
220VAC 60Hz
(A)
(B)
(B)
(C)
(B)
(B)
(C)
(B)
(B)
(C)
9
8
7
6
5
4
3
2
1
1
2
L
N
Ter m inal
(
12P
)
Ter m inal
(
2P
)
OUTDOOR UNIT
Grounding line
Grounding line
Grounding line
Grounding
line
INDOOR UNIT
4
3
2
1
UNIT A UNIT B UNIT C UNIT D
12
11
10
Ter m inal
A
INDOOR UNIT
4
3
2
1
Ter m inal
B
INDOOR UNIT
4
3
2
1
Ter m inal
C
INDOOR UNIT
4
3
2
1
Ter m inal
D
Grounding line
Power supply
Single-phase 220-240VAC 50Hz
220VAC 60Hz
(A)
(B)
(B)
(C)
(B)
(B)
(C)
(B)
(B)
(C)
(B)
(B)
(C)
3 indoor units with SAP-CMRV1936
5-3. Wiring System Diagram
Ter m inal
INDOOR UNIT
4
3
2
1
3
2
1
6
5
8
7
4
4
3
2
1
UNIT B
Ter m inal
INDOOR UNIT
UNIT A
A
(A)
(B)
(B)
(C)
B
Ter m inal
(
8P
)
OUTDOOR UNIT
Grounding line
Grounding line
Grounding line
Single-phase 220-240VAC 50Hz
220VAC 60Hz
Power supply
(B)
(B)
(C)
Fig. 25c
2 indoor units with SAP-CMRV1926
Fig. 25a
08-253 CMRV3146EH_OU EN 10/14/08 2:39 PM Page 20