30
4.AUTO SWITCHER Setup
• Use this to set Channel Switching time while in the Auto Switcher and PIP modes.
• Select the desired channel, ▲ ▼ then
use the ˇ ˆ keys to set the Switching
time.
• Switching time can be between 0 to 30
seconds.
• When the switching time is set to "0" the
corresponding channel will be skipped during
channel switching
• Press the ENTER key, the setting procedure is
now completed and the display returns to the
Main Menu screen.
3.Display Mode Setup
• Use this to display date, time, and Channel Title
display as well as to set the quadrant border color.
• Go to "TYPE", ▲ ▼ then use the
ˇ ˆ keys to select the display type
(ALL, TITLE, DATA & TIME, NONE).
• Go to "BORDER", ▲ ▼ then use the
ˇ ˆ keys to select the BORDER color
(BLACK, WHITE).
• Go to "LOSS INFO", ▲ ▼ then use the
ˇ ˆ keys to select either ON or OFF.
• Press the ENTER key, Where all the adjustments are stored in the memory and the display
will returns to the Main Menu screen.
✳ If LOSS INFO is set to OFF, video loss will not be detected in the event of actual Loss.