Samsung SSC-21 Home Security System User Manual


 
14
4) MOUNTING BRACKET(SBR-120)
! Overview
MOUNTING BRACKET (SBR-120) is used to install camera housing to a wall.
@ Installation
Choose an installation site that can sufficiently support the weight of the equipments to be
installed.
Mark the mounting holes using the house mount bracket as a template, then drill pilot
holes (8 mm diameter, 45 mm depth), and then install and secure the plastic anchors.
At this time, cut away all exposed protrusions.
Align the housing mount bracket over the plastic anchor holes, then firmly fasten the
tapping screws.
Install the housing according to the following CAMERA HOUSING installation method.
# Specification
Use : Indoor
Installation : Wall
Dimensions : 75 115 240(W H D)
Weight : 500g
Operating Temperature : -10 °C ~ 50 °C
$ Accessories
Hexagon Socket Head Cap Screws ---------- 2
L- WRENCH ------------------------------------1
SCREW ------------------------------------------ 4
Plastic Anchor ----------------------------------- 4
Tapping Screw(M5 J5) ---------------------- 4