Filter
Top Products
12_ System Initialization & Basic Operations
system initialization & basic operations
INITIALIZING THE SYSTEM BY SHORT-CIRCUITING
Turn off the product and short-circuit three lines: white line of
the door lock device, green line of the Exit button, and yellow
line of the lock type.
When you turn the product back on, all of the LED indicators
turn red or green, repeat turning on/off twice before being
completely turned off.
In the power-off condition, all LED indicators turn green
bottom up in sequence.
When you hear a beep 4 times, that indicates that the
initialization is completed.
If you initialize the system, all of the data settings will return to the factory default.
BASIC OPERATIONS
When the power is supplied
All of the LED indicators will turn red or green, and repeat turning ON/OFF twice before being completely turned
OFF. In the power-off condition, all LED indicators turn red bottom up in sequence.
You will hear a beep once.
When you present a registered card to the product or press the Exit button
All LED indicators turn from red to green, and turn off top down in sequence before turning back red.
Then, the door stays open for the specifi ed time with the upper two indicators turning green, which indicates the
door is open.
You will hear a beep once.
When you present an unregistered card to the product
All LED indicators turn red, and repeat turning on/off twice before staying in ON.
You will hear a beep twice.
When you present a user card to the product while the door is open
The two LED indicators from the top stay green, indicating the door is open; in the mean time, the other
indicators refl ect the authentication results.
1.
2.
3.
4.
M
1.
2.
1.
2.
3.
1.
2.
1.
Exit Button
Green
Yellow
Lock Type
Door Lock
White
Short-Circuit
Power
Black
Red