Samsung SCV-2080R Home Security System User Manual


  Open as PDF
of 19
 
COLOR DOME CAMERA User Guide
22
COLOR DOME CAMERA User Guide
23
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT
ONLY mode.
• The HLC is not activated in day light or when bright light is not present at night in NIGHT
ONLY mode.
• BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.
Notes
3.SelectadesiredmodeusingtheFunctionSetupswitchandpresstheFunctionSetupswitch.
172
5
120
LOW
Select‘BLC’toadjusttheareatobe
enhanced then adjust the level.
HLC:Enabletheusertochangethelevel,
limit,maskcolor/toneandarea.
HLC(HighLightCompensation):
If the scene contains extremely bright light areas such as; from car headlights, the light
can mask out much of the on-screen detail.
-LEVEL:AdjustleveloftheHLCfunction.
-LIMIT:Enabletochangetheoperatingcondition.
-MASKCOLOR/TONE:Changethecolor/transparencyofthemaskingarea.
(Black,Red,Blue,Cyan,Magenta)
-TOP/BOTTOM/LEFT/RIGHT:Adjusttheareatobeenhanced
OFF:Notbeingused
2.SelectadesiredmodeusingtheFunctionSetup.
BLC:Enablesausertodirectlyselectadesiredareafromapicture,andtoviewthe
area more clearly.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
Operating Your Camera
2.SelectadesiredmodeusingtheFunctionSetupswitch.
OFF:DeactivatesSSNR3.Noiseisnotreduced.
ON :ActivatesSSNR3sothatnoiseisreduced.
3.SettheSSNR3modeto‘ON’andpresstheFunctionSetupswitch.Thenyoucanadjustthe
noise reduction level.
This function reduces the background noise in a low luminance environment.
1.WhentheSETUPmenuscreenisdisplayed,select‘SSNR3’byusingtheFunctionSetup
switchsothatthearrowindicates‘SSNR3’.
SSNR3
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT AUTO
• You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is
‘OFF’.
• When adjusting the noise reduction level in the SSNR mode, remember that the higher the
level set, the more the noise level will be reduced, as will the brightness of the image.
Notes
 previous next