Samsung SCV-2080R Home Security System User Manual


  Open as PDF
of 19
 
COLOR DOME CAMERA User Guide
18
COLOR DOME CAMERA User Guide
19
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
EXPOSURE
1.WhentheSETUPmenuscreenisdisplayed,select‘EXPOSURE’byusingtheFunctionSetupswitch.
2.SelectadesiredmodeusingtheFunctionSetupswitch.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
Notes
AGC(AUTOGAINCONTROL):Thehigherthegainlevel,thebrighterthescreen-butthe
higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP:Whenitisnightordark,thecameraautomaticallydetectsthelightleveland
maintains a clear picture if this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
RETURN:SelectthistosavethechangesintheEXPOSUREmenuandreturntotheSETUP
menu.
SHUTTER : You can select the shutter.
- --- : Shutter speed is fixed at 1/60sec(1/50sec)
- ESC : Select this to control the shutter speed automatically. If ESC is selected, the
shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
(NTSC MODEL : 1/60~1/120,000, PAL MODEL : 1/50~1/120,000)
- A.FLK : Select this when you see picture flicker, this can happen when the frequency
of the local lighting clashes with the camera.
EXPOSURE SETUP
1.BRIGHTNESS 25
2.SHUTTER ---
3.AGC HIGH
4.SENS-UP OFF
5.RETURN
• If you press the Function Setup switch to ‘AUTO’ mode, you can adjust brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• Note that the higher the zoom level, the brighter the screen, but the more likely there will be
a ghosting effect.
• It is normal for Noise, Spots and Whitish symptoms to appear in SENS-UP mode when the
D-zoom level is increased.
Notes
MAIN SETUP
1.LENS DC
2.EXPOSURE
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, selectLENSbyusingtheFunctionSetup
switch so that the arrow indicatesLENS.
2.DC:YoucanadjusttheminimumshutterandmaximumvalueofESCshuttermode.
LENS
3.TheLensmodehassubmenuitemsaslistedbelow.
-BRIGHTNESS:Adjuststhevideobrightness.
-FOCUSADJ :ToadjusttheDClensfocuscorrectly,youmustactivatetheFocusSettingsmode
undereachlensmenu.ActivatetheFocusSettingsmode,adjustthelensfocus,
and then deactivate the settings mode.
Operating Your Camera
 previous next