Rinnai RHFE-431WTA Furnace User Manual


 
FEATURES OF THE RHFE-431WTA UNITS
SAFETY DEVICES
– 1 –
Clean Heating Forced Flue Type
Easy Operation One-Touch Ignition
Sensible Temperature Control Feature
Comfortable Room Temperature Control and Display
Warm Air Outlet at Floor Level
(
Keeps Your Feet Warm
)
Child Safety Function Lock
Room Temperature Setting Memory
Dirty Air Filter Indicator Lamp
Energy-Saving Economy Setting
Humidifier Tray
Air Flow Directional Louvers
Direct Vent Easily Installed
Proportional Heating Variable Capacity
Hush! Quiet Operation
Modern Design Minimizes Floor Space Requirements
Failure Message Display
Timer Override Mode
Spark Safety Device: Automatically shuts unit down when there is an abnormal spark at time
of ignition.
Flame Failure Device: Activated when burner flame fails. This prevents raw gas from being
released.
Overheat Switch: This device automatically cuts the gas off if the heater exceeds a
predetermined temperature. This is normally caused by an
obstruction in front of the louvers, or a blocked fan filter.
Fusible Links: Backs up the overheat switch. If the fusible link cuts the unit off, a
service call by an authorized person is required to replace the link.
Overcurrent Prevention Device: This is a 3 amp. glass fuse found on P.C. board. Design
to shut unit down in case of overcurrent. If fuse blows all
indicator lamps will be "OFF".
Power Outage Safety Device: This safety device cuts off gas passage and stops
operation.