Filter
Top Products
– 24 –
1
2
3
4
5
SETTING THE CLOCK
TO OPEN THE CONTROL PANEL
Lift lightly in the center of the lid. The control
panel lid will then drop backward to an angle.
Note: When the appliance is first
plugged in or after a power failure
longer than 24 hours the display
will show “PF”.
SETTING THE CURRENT TIME & DAY
(This example shows setting the clock to 8:20am on Saturday).
DAY OF THE WEEK
Press the “Clock” button
once. The day of the week
and is displayed.
Press either of the “ ” or “ ”
buttons until the correct day of
the week is displayed.
Press the “Select” button once
to lock in and complete day of
the week selection. The time of
day will then flash.
TIME OF DAY
To set the time press the “ ”
or “ ” buttons until the correct
time of day is displayed.
Pressing either button once will change the time in single minutes.
Holding eigther button down will change the time rapidly, first in minutes, then in hours.
CONFIRM SETTINGS
Press the “Select”or “Clock”
button once to lock in and
complete setting the time.
The indicators will go out.
Select
Clock
Select
Clock
Select
Clock
Mo
Programming
Clock Select
Timers
Select
Clock
Sa
Programming
Clock Select
Timers
am
Select
Clock
Sa
Programming
Clock Select
Timers
am
Select
Clock
Sa
Programming
Clock Select
Timers
am
Sa
Programming
Clock Select
Timers