Rinnai RCE-229A Gas Heater User Manual


 
Model RCE-229A 800-621-941915
TIMER OPERATION
OFF TIMER OPERATION
This feature is useful on cold nights when the unit continues to operate after you have gone to
bed.
The OFF Timer can be selected when the heater is operating manually, in OFF, or in ON Timer mode.
When the OFF Timer feature is selected, the heater will automatically switch off after 60 minutes.
1 Press the OFF Timer button. The OFF Timer
indicator lights up.
The heater will operate at the preset temperature selected in the system memory.
The temperature will automatically run at 80°F if the set temperature is “H”.
If selected while the ON Timer is set, the heater will come on and run for 60 minutes, after which it will
remain in ON Timer standby mode.
If the ON Timer is selected after the OFF Timer has been selected, the unit will run for 60 minutes (OFF
Timer mode ) and then remain in the ON Timer standby mode.
In all cases where the ON and OFF Timers are selected together, the OFF Timer will take precedence and
run the heater for 60 minutes after which the heater will remain in the ON Timer standby mode.
OFF TIMER STOPS AFTER 1 HOUR.
Five minutes before the finish of the OFF Timer, the OFF Timer indicator will flash, indicating that the function is
nearing completion.
The OFF Timer indicator will then go out at completion of the 60 minute time delay.
In cases where both the ON and OFF Timers are selected, once the OFF Timer has run the heater for 60 minutes,
the ON Timer indicator will remain alight and the heater will be in ON Timer standby mode.
To cancel the OFF Timer, press either the ON-OFF button or the OFF Timer button at any time.
ON TIMER OPERATION
The ON Timer allows you to program the heater to turn on after a pre-determined time period.
As an example, if the time now is 10:30 pm and you wish the heater to start at 6:00 am tomorrow morning, then the
ON Timer must be set to 7.5(hours).
The ON Timer preset times are from 30 minutes to 24 hours.
These times can be selected in 30 minute increments up to 10 hours and then 1 hour increments up to the maximum
of 24 hours.
BEFORE SELECTING THE ON TIMER CONFIRM:
That the desired preset room temperature has been set (see page 13)