Filter
Top Products
8
9
For Safety: When servicing machine, unplug
cord from wall outlet.
Regular Maintenance Tips
• Empty and rinse out recovery tank
thoroughly.
• Remove oat shut-off screen from hinged
cover above the recovery tank cover and
clean (fig 1).
• Drain remaining water from solution tank
(see “Draining Tanks”).
• Clean solution tank external lter.
(see “Filter Maintenance”).
• Remove any entangled carpet bers and
debris from brushes underneath machine
(fig 2).
• Remove any debris lodged in nozzle.
• Wipe off power cord and check for damage,
replace if necessary. Coil cord neatly
around cord hooks after use.
Maintenance Maintenance
Draining Tanks
For Safety: When servicing machine, unplug
cord from wall outlet.
Draining recovery tank
• Turn machine off and unplug power cord.
• Hinge open cover, lift recovery tank out
and empty.
Note: Make sure to rinse out recovery tank
after each use. Do not use this tank to fill
machine with cleaning solution.
Draining solution tank
• Remove solution tank drain hose at rear of
machine and empty remaining solution
(fig 1).
• Replace drain hose (g 2).
Filter Maintenance
To clean the external filter, remove the
recovery tank and locate the filter. Remove
the filter screws, grasp the inner handles and
pull out the filter (fig 3). Rinse the filter inside
and out. You can then replace the filter by
snapping the filter back into the solution tank
and reattaching the screws.
Figure 1
Figure 1
Figure 2
Figure 2
Figure 3