Filter
Top Products
LIGHTING INSTRUCTIONS FOR HEATERS WITH
ELECTRONIC IGNITION (IID)
FOR MODELS WITH AUTOMATIC GAS VALVES
726-1826
1. Close all gas valves. Turn off electric power
supply. Wait five (5) minutes.
2. Open manual pilot valve. Turn on electric power.
Pilot is automatically lighted.
3. Open main gas valve.
4. Set temperature controls to desired temperature.
TO SHUT DOWN
Close all manual gas valves. Turn off electric
power.
TO PILOT(S)
MAIN GAS SHUT-OFF
VALVE SHOWN IN THE
"ON" POSITION
32
PILOT SHUT-OFF
VALVE CONTROL
SHOWN IN THE
"ON" POSITION