Regency E21-NG1 Indoor Fireplace User Manual


 
15
Regency E21 Gas Fireplace Insert
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!
Conversion Kit from Natural Gas to Propane Model #533-969
1)
Turn the unit off and allow it to cool to room temperature.
2) Shut off gass supply
3)
Unplug or disconnect power source to stove.
4)
Remove glass front (see manual).
5)
Remove logs and brick panels (if installed).
6)
Remove the Grate by removing the screws on each side of the
grate.
7)
Remove the Burner Tray by removing 1 screw on each side of the
tray, then slide the tray to the left and lift out.
8)
Pull off the pilot cap to expose the pilot orifi ce.
9)
Unscrew the pilot orifi ce with the allen key (provided) and replace
with the LP pilot orifi ce in the kit.
10)
Remove burner orifi ce with 1/2" wrench. Use another wrench to hold
onto the elbow behind the offi ceReplace with the #54 orifi ce in the
Kit.
Burner
Orifi ce
Remove the 2 screws holding the grate in position.
Remove the 2 screws,
push Burner Tray to the left, and lift off.
INSTALLATION