Filter
Top Products
4 Constant Running Hydraulic Pump - Installation Guide
Specifications
Pump specifications
Pump dimensions
Figure 2: Pump dimensions
Table 1: Pump specifications
Performance
(at nominal voltage)
Type CR1
M81125 (12 V)
M81127 (24 V)
Type CR2
M81126 (12 V)
M81128 (24 V)
Ram capacity 350-500 cc
(21-30 in
3
)
500-1200 cc
(30-73 in
3
)
Ram single or double ended
Maximum stall
pressure (at 12 V)
50 bar
(750 psi)
50 bar
(750 psi)
Peak flow rate
(no load)
3000 cc/min
(180 in
3
/min)
4500 cc/min
(270 in
3
/min)
Other information (applies to Types CR1 and CR2)
protected for use in engine compartments
CE approvals - conforms to:
89/336/EC (EMC), EN60945:1997
94/25/EC (RCD), EN28846:1993
356 mm (14 in)
262 mm (10.3 in)
224 mm (8.8 in)
D5178-1