Filter
Top Products
Quartz Thermo installation guide page 10
Drill and plug two holes 642mm-655mm
vertically apart using a spirit level if
necessary. Fit the rail end clip into position
and loosely fit the lower bracket into position.
7
Pass the rail through the handset holder
whilst keeping the slider levers depressed
with the handset holder pointing in a
downward direction.
8
Carefully slide the gel hook onto the rail
under the handset holder.
9
Current water supply regulations state the handset should not be allowed to
pass a point 25mm above the spill over level of the bath or shower tray.
If this cannot be achieved, the hose must be passed through the gel hook
which has also been designed to be utilised as a hose restraint.
Fit the rail into the rail end bodies taking care to engage the location slot
onto the lugs.
Fit the rail end clip fitting into position into
the top rail end body and secure the rail
assembly to wall using the screws provided
ensuring the rail and rail end bodies remain
firmly engaged.
Place the rail end covers into position and
push firmly into place.
10
11
12
13