Filter
Top Products
Page 5
Isle Royale Wood Stove
R
February 4, 2005
250-5763B
DIMENSIONS
FRONT VIEW
SIDE VIEW
29" (737mm)
28-3/4" (730mm)
30" (762mm)
C
L
8-1/4"
(210mm)
16-1/2"
(419mm)
24-5/8" (625mm)
26-7/16"
(570mm)
30"
(762mm)
22-3/4" (578mm)
16-3/4"
(425mm)
VENT SPECIFICATIONS:
Single Wall: Six inch (6") (152mm) diameter, minimum 24 MSG black or blued steel connector pipe, with a listed factory-
built chimney type UL103 HT* suitable for use with solid fuels, or a masonry chimney, and the referenced clearances.
Double Wall/Mobile Home: Six inch (6”) (152mm) diameter, listed double wall air insulated connector pipe with listed
factory-built UL103 HT* Class “A” chimney, or a masonry chimney (Mobile Home must be equipped with a spark arrestor),
and the referenced clearances. Use only double-wall connector pipe, Dura-Vent DVL, Selkirk metalbestos DS, Security
DL double wall connector or any listed double-wall connector pipe.
*In Canada must comply with CAN/ULC-S269 or the 650°
Factory-built chimney.
LABEL IS LOCATED ON THE BACK OF THE STOVE
25"
(635mm)
C
L
21-5/8"
(549mm)
27"
(686mm)
5-1/4"
(133mm)
SIDE VIEW
Shown with Hearth
Legs and Horizontal
Flue Kit
NOTE: If Hearth Legs
are installed, you may
install an Outside Air
Kit or a Blower, NOT
BOTH.