Phonetics 5000 Home Security System User Manual


 
49
Chapter 5: Outputs
WIRING THE ANALOG OUTPUTS
To wire the analog outputs:
1. Wire the positive terminal on the DC device to a numbered terminal on the analog
outputs terminal block.
2. Wire the negative terminal on the DC device to a common on the analog outputs
terminal block.
See diagram below:
ANALOG OUTPUTS
C 4 C 3 C 2 C 1
DC device
- +
Wiring an analog device
OUTPUT SPECIFICATIONS
DIGITAL:
Output Voltage 0 to 5V
Output Source Current (V = 0V) -30mA Max
Output Sink Current (V = 5V) 20mA Max
ANALOG:
Output Voltage 0 to 10V
Resolution 8 bits or .03137V
Maximum Total Unadjusted Error +2 LSB
Voltage Output Slew Rate 3V/µs
Voltage Output Settling Time 4µs
Minimum Output Load Resistance (V = 10V) 2K
RELAY:
Type: SPDT
Rated Load 5A at 120VAC
5A at 30VDC
Carry Current 5A