Filter
Top Products
Installation & User’s Manual PLCYC LED Luminaires
6 INSTALLATION AND SET UP
INSTALLATION AND SET UP
1. Power Requirements
The PLCYC LED Luminaire operates on 100 to 240 volts AC (+/- 10%, auto-ranging). The luminaire contains an
auto-ranging power supply. Depending on supply voltage, each luminaire can draw up to 1.5 amps.
WARNING! *These figures are based on the Maximum Allowable Input Current of 20 Amps (and the maximum
power supply limit of 150 Watts). Do not overload circuits!
2. Connecting Power
Units can be powered in one of two ways:
• Direct connection to a AC power source using an AC input cable.
• Daisy chain connection using a interconnect AC cable.
IMPORTANT AC POWER CONNECTION NOTES:
a. When using the daisy-chain connection method, ONLY connect PLCYC LED Luminaires
to AC Output Connection of PLCYC LED Luminaires. DO NOT CONNECT OTHER TYPES
OF LUMINAIRES OR DEVICES!
b. Use only use approved cable types.
c. Do not overload circuits!
d. Do not connect PLCYC LED Luminaires to dimmed circuits.
e. The MAXIMUM allowable number of PLCYC Luminaires which can be 'daisy-chained' on
one power feed are listed in Table 1, above. DO NOT EXCEED!' !
Table 1: PLCYC LED Luminaire Voltage vs. Current
Voltage
(AC)
Total
Current (A)
Maximum
number of
units that can
be linked
together*
Voltage
(AC)
Total
Current (A)
Maximum
number of
units that can
be linked
together*
100 1.50 13 180 0.83 24
110 1.36 14 190 0.79 25
120 1.25 16 200 0.75 26
130 1.15 17 210 0.71 28
140 1.07 18 220 0.68 29
150 1.00 20 230 0.65 30
160 0.94 21 240 0.63 32
170 0.88 22
AC Input Connection
AC Output Connection
(to next luminaire, optional)