Optic guide – Specications
Philips indoor luminairesTechnical data12.36
Innovative OLC optics
OLCstandsforOmnidirectionalLightControl,all-aroundlight
control.TheOLCopticsaredesignedtoobtainoptimallightingonthe
working plane and to limit undesired brightness spots, avoiding direct
andreectedglareallaroundtheluminaire.Thenewopenaluminum
OLCopticsC8,D8,C8-C,D8-C,C8-VHandD8-VHcomplementthe
C6,D6,M6,C7andD7range,andthenewdecorativeOLCoptics
AC-MLOandPC-MLOareclosed.Theyallcombineoptimalluminous
efcacyandlightdistributionwithexcellentall-roundglarecontrol.
New generation optics for TL5 lamps
Thecomputer-aideddesignedshapeofthesidereectorsin
combination with the advanced miniaturised 3-dimensional cross
lamellae with the broken arch contour are made of high-grade
aluminum.Theyhavegivenrisetonewopticalqualities:
•All-roundglarecontrolOLC1000cd/m
2
ofC8,D8,C8-VHand
D8-VH,orOLC200cd/m
2
ofC8-CandD8-C,isinaccordance
with the European standard on lighting of workplaces EN 12464-1.
Dependingontheapplication,theexceedinglyefcientopticsC8-VH
andD8-VH,theperformeropticsC8andD8,orthecomfortoptics
C8-CandD8-Ccanbeselectedfortheapplication.
• Although the width of the optic is very small, the direct glare from
the luminaire is well controlled and the UGR
R
limit of 19 is always
met.
• The light output ratio (LOR) is up to 94%, depending on the type of
mirror material, number of lamps per luminaire and lamp type.
• The wide-beam delta-shaped light distribution yields a high
uniformity of light at the working plane and a pleasant balance
between the horizontal and vertical illuminances.
• No disturbing luminance spots can be noticed for all optic versions
– a very smooth uniform appearance is produced by the comfort
versionC8-CandD8-C.
• Slim-line optics have an optical opening only 55 mm in width to
ensure they are inconspicuous in the ceiling; slim-line luminaires offer
the best aesthetical appearance.
Cross louver of OLC optics C8 and D8.
Notice the broken arch and the seam at the underside for improved efciency
and the fully enclosed convex top for optimal lighting control and higher efciency.
Optic guide – Specications
Previous generations of optics with a larger optical width like the
miniopticsC7andD7(opticalopeningof80mm)with3-Dlamellae
with curved upper side and concave underside result in slightly lower
efciencies.However,theirdirectandreectedglareguresremain
within the limits set in the standards. This also applies for the mini, the
midiandmaxiopticsC6,D6andM6(opticalopeningof80,100and
125 mm respectively) with their Fresnel structure on top of the cross
louvers.
Theseopticalfeaturescreatecomfortableandhighlyefcientofce
lighting:
•Flexibleofcedesignthankstoall-roundglarecontrol:computer
displays can be positioned anywhere in the room without the risk of
reectedglare.
• Thanks to the high light output ratio the lighting is very cost-effective
and less installation power is required to achieve the illuminance
specied.
• The delta-shaped light distribution ensures uniform lighting, even in
the case of wider or random luminaire spacing.
• No disturbing luminance spots means a high level of visual comfort.
Thewidechoiceofnishesforthehigh-gradealuminumusedforthe
optics, which are available in semi-high gloss D8, D7 and D6, high gloss
C8,C7andC6andmattM6,alwaysoffersanidealopticforevery
application, depending on personal preferences.
Matt mirror material (M) gives the luminaire a particular visual
presence in the ceiling, resulting in a certain extent of visual guidance.
Highglossspecularmaterial(C)reducesalldisturbingluminances
and produces a higher light output, however, this material is more
susceptibletodustpollutionandngerprints.
Semi-high-gloss mirror material (D) offers the best overall practical
value:thesatinmaterialhasalowvisualpresencewithoutbecominga
“darkspot”andisnotsensitivetosmallamountsofpollution.
Every trend – in this case low-brightness luminaires – creates a
counter-trend:visualguidanceandclearpresenceofthelighting
elements in the ceiling architecture can be achieved using the new
MLO optics.
Indoor_2008_Chapter_12_LIS.indb 36 20-05-2008 14:34:41