Philips indoor luminaires
Specication data luminaires
Technical data
Technical data
12.33
4. Panel ceilings
The main carriers of these systems are usually placed at main building
moduledistances,often1200or1800mm.Ceilingpanelsaremounted
between the main carriers. In this type of ceiling metal and mineral
panels are used. If the distance between the main carriers does not
match the luminaire length, the luminaires can be made to measure so
that they can be mounted between the main carriers like the panels.
ForproleAtheluminairecanbemountedasaninlay.Onrequest
safetybracketscanbedeliveredwiththeluminaire.IfproleBisused,
brackets are required and should be ordered separately. Alternatively,
the luminaires could be factory pre-mounted in the original ceiling
tiles.
Applications
Areas where removable partition walls are used and where acoustic
performance of high quality is required. In corridors each panel can
span the total width, typically 1.8 m.
5. Plaster ceilings
For plaster ceilings the luminaires are usually made lower and lighter
in weight. Brackets are reduced to clips, and they can be inserted in
two positions by means of the slots provided in the luminaire housing
sides. As the plaster can vary in thickness, it may be necessary to
use additional spacer strips to bridge the distance between ceiling
and supporting clips. Mounted in this way, the luminaire front can be
mounted directly against the ceiling and will effectively hide its opening.
For higher and heavier luminaires suspension brackets are provided
which can be adjusted in height.
3. Strip ceilings
This ceiling system consists of main carriers on which metal strips are
clicked. They can have various widths. Luminaires are usually mounted
in line with the strips and perpendicular to the main carriers. In this
case,alengthprolemountedtothesideoftheluminaireisrequired,
or suspension brackets at the head of the luminaire are required if the
luminairetsexactlyinbetweentwomaincarriers(seegures).
Fixation with ZBS319 LP Fixation with ZBS300 SMB
8 - 29
38 - 59
mm02
mm01
4x / 6x
Fixation with ZBS471 SMB-PLCFixation with ZBS460 SMB-PLC
Indoor_2008_Chapter_12_LIS.indb 33 20-05-2008 14:34:25