Filter
Top Products
Optic guide – Specications
Technical data
Philips indoor luminaires Technical data 12.47
12
Narrow beam rotational symmetric
optic for down lighting and high-impact
accent lighting. Made of anodised
aluminum with 99% reection.
Intensity varies greatly with lamp type
and power.
For accent lighting with dramatic
effects.
24
Medium beam rotationally symmetric
optic for down lighting and strong
accent lighting. Made of anodised
aluminum with 99% reection.
Intensity varies greatly with lamp type
and power.
For accent lighting with theatrical
effects and general lighting from higher
ceilings.
36
Medium beam rotationally symmetric
optic for down lighting and accent
lighting. Made of anodised aluminum
with 99% reection.
Intensity varies greatly with lamp type
and power.
For accent and general lighting in areas
where high-quality light sources are
required.
60
Wide-beam rotationally symmetric
optic for down lighting.
Made of anodised aluminum with 99%
reection. Intensity varies greatly with
lamp type and power.
For general lighting in retail areas,
museums, hotels and lobby areas in
ofces and public buildings.
Optics for projectors with compact high-intensity discharge lamps
Opticsforcompacthigh-intensitydischargelampslikeMasterColourandWhiteSONareusuallycircularinshape.Theopticopeningdimension
varies with the luminaire/lamp combination. The optical design is optimized for high light output and creation of the desired light distribution and
effect (accent factor).
The optics for compact high-intensity discharge lamps are applied in projector families like EFix, Fugato, Magneos and UnicOne.
LOR up to 67%
I
max
approx. 15 kcd/klm
LOR up to 65%
I
max
approx. 2 kcd/klm
LOR up to 60%
I
max
approx. 1 kcd/klm
LOR up to 60%
I
max
approx.
0.75 kcd/klm
Indoor_2008_Chapter_12_LIS.indb 47 20-05-2008 14:35:37