Filter
Top Products
4. Open the indoor control box cover. (2 pcs)
5. Insert firmly the connector of cosmetic louver to indoor
pcb CN-STM1, CN-DISP and CN-STM2.
Be caution not to clamp the cord in between control board
and control board cover.
6. After complete, install back removed part follow opposite
procedure.
WARNING Be sure to hook the air inlet grill string, to prevent
grill from falling and causing injury from it.
3. Fit the decorative panel and ceiling wall together and confirm no gap in between. Readjust indoor unit height, if there is a gap
between ceiling wall and decorative panel.
61
CS-E15DB4EW CU-E15DBE / CS-E18DB4EW CU-E18DBE / CS-E21DB4ES CU-E21DBE